Zhongmo Formwork

中文

Company News

Industry News

Information Details

Which is better, self-lifting scaffolding or traditional scaffolding?

Date：

2020-03-16 11:35

　　A. Comparison with the traditional floor-standing double-row scaffolding
　　1. The one-time input materials are greatly reduced, and the utilization rate of turnover materials is improved.
　　2. simple and swift operation, less labor input and low labor intensity.
　　3. the use of the process does not occupy the tower crane, speed up the construction progress.
　　4. reduce the project cost.
　　Second, compared with other types of lifting scaffolding
　　1. extremely easy to operate, the possibility of misoperation is small, easy to manage.
　　2. lifting, using any working conditions, each main frame at each of the three points above the independent attachment
　　If any of them fails, the scaffold will not fall or tip over.
　　3. Fall protection device, multiple settings, multiple protection, and flexible, intuitive, reliable.
　　4. Simple, clear and reliable force-bearing structure.
　　5. With the function of stepless adjustment of the main structure error of the reserved hole, good adaptability.
　　6. Guide seat lift scaffolding structure lift scaffolding structure is mainly composed of guide rail main frame, horizontal support frame, attached wall fixed guide seat, lifting equipment, fall protection device, etc.

Previous

How important is the fireproof performance of climbing frame mesh

What are the characteristics of the new intelligent climbing frame

Next

Previous

Previous

How important is the fireproof performance of climbing frame mesh

Next

What are the characteristics of the new intelligent climbing frame

Related News

Climbing frame is also called lifting frame

Climbing frame is also called lifting frame

Climbing frame is also called lifting frame, according to its power source can be divided into hydraulic type, electric type, human hand-pulled type and other major categories. It is a new type of scaffolding system developed in recent years, mainly used in high-rise shear wall type buildings. It can climb or descend upwards along the building. This system makes a complete change in scaffolding technology.

How does the climbing and landing of the climbing frame work?

How does the climbing and landing of the climbing frame work?

Climbing process: all check the climbing organization, frame and obstacles → install electric hoist and debug pre-tightening → dispense with the upper frame and structure pulling connection → dispense with the safety net on the outside of the frame at the broken piece → raise the frame 100mm → remove the unloading seat → raise the frame one floor high → install the unloading seat → pulling connection to the upper climbing frame (the distance between pulling connections is not more than 6m) → close the safety net on the outside of the frame at the broken piece → raise the Wire rope turnover to the upper installation position → remove the lowermost anti-fall bar, installation to the uppermost position → construction construction layer → installation of the upper adjustable tie rod, attached wall guide seat → check before raising → ready to enter the next lifting cycle.

Notes on the use of construction scaffolding

Notes on the use of construction scaffolding

The construction load (weight of personnel, materials and machinery) used on each 1m?shelf surface of the working layer shall not exceed the following prescribed values or construction design values; the standard value of the construction load (weight of personnel, apparatus and materials on the working layer), the structural scaffolding takes 3kN/m2, and the decoration scaffolding takes 2kN/m?

Learn about the several forms of climbing frame mesh structure

Learn about the several forms of climbing frame mesh structure

The construction scaffolding net itself needs to be attached to the Wuhan construction scaffolding in order to play its own role, because the different sources of power are divided into hydraulic and electric, human hand-pulled type of the main categories.

How important is the fireproof performance of climbing frame mesh

How important is the fireproof performance of climbing frame mesh

Is the fire performance of the climbing frame mesh important? Here Wuhan all-steel climbing frame manufacturers will explain it to you! The climbing net with fire resistance can always give more people in the use of the process to bring some different experience, because the whole climbing net their use in some places are different, so they are naturally different to the setting of the environment, in order to facilitate better use, in some special environment of the protective climbing net can always provide convenience to more people.

Which is better, self-lifting scaffolding or traditional scaffolding?

Which is better, self-lifting scaffolding or traditional scaffolding?

Guide lift scaffolding structure lift scaffolding structure mainly consists of guide rail main frame, horizontal support frame, attached wall fixed guide seat, lifting equipment, fall arrest device, etc.

What are the characteristics of the new intelligent climbing frame

What are the characteristics of the new intelligent climbing frame

Realize the function of low hitch and high use. It is assembled at the bottom of the main body of the building at one time, attached to the building and lifted continuously with the increase of floor height, the whole operation process does not occupy other lifting machinery, greatly improving the construction efficiency, and the site environment is more humane, easier to manage and maintain, and the effect of civilized operation is more prominent.

Zhongmo Formwork
Search

Please enter your search terms to retrieve the content you want to know